classification Phantom, Anthropomorphic, Radiographic Manufacturer:

View Specs →

gudid myQA SRS Phantom Cyberknife for myQA SRS detector for SRS and SBRT patient plan verification Manufacturer: IBA Dosimetry GmbH

View Specs →

gudid myQA SRS Phantom for myQA SRS detector for SRS and SBRT patient plan verification Manufacturer: IBA Dosimetry GmbH

View Specs →

gudid miniPhantom R used as Patient QA Phantom with MatriXX Resolution Manufacturer: IBA Dosimetry GmbH

View Specs →

gudid miniPhantom R used as Patient QA Phantom with MatriXX Resolution Manufacturer: IBA Dosimetry GmbH

View Specs →

gudid Solid Phantom, miniPhantom Manufacturer: IBA Dosimetry GmbH

View Specs →

gudid Gafchromic Manufacturer: ASHLAND SPECIALTY INGREDIENTS G.P.

View Specs →

gudid Gafchromic Manufacturer: ASHLAND SPECIALTY INGREDIENTS G.P.

View Specs →

gudid Accessory to Model 1177 MapCHECK 2. Manufacturer: SUN NUCLEAR CORP.

View Specs →

gudid Accessory to Model 1177 MapCHECK 2. Manufacturer: SUN NUCLEAR CORP.

View Specs →

gudid Foot in plantar flexion, right Manufacturer: Providus Holdings, Inc.

View Specs →

gudid Foot relaxed, left Manufacturer: Providus Holdings, Inc.

View Specs →

gudid Knee 90 flexion, right Manufacturer: Providus Holdings, Inc.

View Specs →

gudid Knee extended, left Manufacturer: Providus Holdings, Inc.

View Specs →

gudid Hand relaxed Manufacturer: Providus Holdings, Inc.

View Specs →

gudid Hand pronated Manufacturer: Providus Holdings, Inc.

View Specs →

gudid Elbow 90 flexion, right Manufacturer: Providus Holdings, Inc.

View Specs →

gudid Elbow extended, left Manufacturer: Providus Holdings, Inc.

View Specs →

gudid Optional PTW31030 Chamber Mount Manufacturer: Providus Holdings, Inc.

View Specs →

gudid LiquiPhil End-to-End Half Sphere Phantom, Includes chamber mount for A116. Manufacturer: Providus Holdings, Inc.

View Specs →

gudid Optional Tumor Vessel Assembly, 10cm Tumor Vessel Assembly includes 10cm x 12cm threaded 10cm Tumor Vessel Assembly includes 10cm x 12cm threaded tumor support rod Manufacturer: Providus Holdings, Inc.

View Specs →

gudid LiquiPhil End-to-End Pelvis, includes pelvis form, two 10cm ovoid tumor vessels and permanent storage case Manufacturer: Providus Holdings, Inc.

View Specs →

gudid PTW Pinpoint Chamber Adapter Manufacturer: Providus Holdings, Inc.

View Specs →

gudid Additional 2cm x 4cm tumor vessel and support post Manufacturer: Providus Holdings, Inc.

View Specs →

gudid Two Plane Film Holder, has two 1mm channels for holding dosimetry film. Manufacturer: Providus Holdings, Inc.

View Specs →

gudid Optional Tumor Vessel Inserts, 5mm Plug Holder, holds the 5mm plugs listed on the RANDO price list. The 5mm plugs are designed for use with TLD chips, rods and powder. Five RAN235 plugs included. Manufacturer: Providus Holdings, Inc.

View Specs →

gudid LiquiPhil End-to-End Head II with Bite Feature, Radiosurgery Verification Phantom including head form with bite feature, three 2cm x 4cm threaded ovoid tumor vessels, and permanent storage case Manufacturer: Providus Holdings, Inc.

View Specs →

gudid LiquiPhil End-to-End Head, Radiosurgery Verification Phantom including head form, three 2cm x 4cm threaded ovoid tumor vessels and permanent storage case Manufacturer: Providus Holdings, Inc.

View Specs →

gudid Combination set of nine hollow tumors with one each of the following sizes: Spherical: 1cm, 1.5cm, 2cm, 3cm Ovoid: 1.5cm x 3cm long, 2cm x 3cm long, 2cm x 4cm long, 3cm x 4cm long, 3cm x 5cm long Manufacturer: Providus Holdings, Inc.

View Specs →

gudid Hollow Tumors, Combination Sets of Spherical and Ovoid, Combination set of six hollow tumors Manufacturer: Providus Holdings, Inc.

View Specs →

gudid Hollow Tumors, Ovoid, Ovoid, hollow tumor set of five with one each of the following diameters: 1.5cm x 3cm long, 2cm x 3cm long, 2cm x 4cm long, 3cm x 4cm long and 3cm x 5cm long Manufacturer: Providus Holdings, Inc.

View Specs →

gudid Hollow Tumors, Spherical, Spherical, hollow tumor set of seven with one each of the following diameters: 1cm, 1.5cm, 2cm, 3cm, 4cm, 5cm and 6cm Manufacturer: Providus Holdings, Inc.

View Specs →

gudid Standard Imaging Reconstruction Jig Small allows spatial localization of catheters or other setups for HDR brachytherapy applications. It allows determination of the position of objects in space to a high degree of accuracy. Manufacturer: STANDARD IMAGING INC.

View Specs →

gudid Standard Imaging Reconstruction Jig Large allows spatial localization of catheters or other setups for HDR brachytherapy applications. It allows determination of the position of objects in space to a high degree of accuracy. Manufacturer: STANDARD IMAGING INC.

View Specs →

gudid Standard Imaging IMRT Phantoms are designed to provide feedback on complex treatment plans generated using 3D. The phantoms are designed to mimic a human torso. Both film and ion chambers can be simultaneously irradiated for comparisons with the treatment planning system. Manufacturer: STANDARD IMAGING INC.

View Specs →

gudid Standard Imaging Winston Lutz Cube Phantom is a phantom designed to be used with a radiation treatment system to determine, from images of the phantom, the positional accuracy of the treatment isocenter of the system. Manufacturer: STANDARD IMAGING INC.

View Specs →

gudid Standard Imaging Stereotactic Dose Verification Phantom can be used for a wide variety of tests including routine absolute dosimetry output checks and treatment planning system(TPS) commissioning and quality assurance(QA) tests as recommended by TG 53 and IEC 430 Treatment Planning System Commissioning and QA Standards. Patient specific dosimetry tests can be performed easily as well. Manufacturer: STANDARD IMAGING INC.

View Specs →

gudid Standard Imaging MIMI (Multiple Imaging Modality Isocentricity) Phantom is designed for daily or weekly quality assurance of the geometric accuracy of the isocenter described by several systems included on many modern linear accelerators: the positioning lasers, the kV imaging system, the MV treatment beam and for Elekta and Varian optical guidance systems as well. Manufacturer: STANDARD IMAGING INC.

View Specs →

gudid Standard Imaging Lucy 3D QA Phantom is designed to perform comprehensive quality assurance tests for an entire stereotactic radiosurgery/SRT procedure. The phantom allows verification of treatment planning software calculations for volume measurements, distance measurements, image fusion and image transfer. Dosimetry verification is accomplished via components that accommodate ion chambers, film, MOSFETs, TLDs and polymer gels. Manufacturer: STANDARD IMAGING INC.

View Specs →

gudid The R2*/T2* phantom is a medical device accessory intended to be used as an alternative to human test subject to avoid potential complications for an MRI centre in order to evaluate that the scanning protocol have been correctly set up for the analysis of cardiac R2* and T2* values using the CardiacT2* on 1.5T and 3T MRI scanners. The R2*/T2* Phantom consists of an amber bottle having 09 (nine) plastic tubes (30mL) of 0.8% Agarose (C24H38O19) gel doped with varying known concentrations (0.10 mM to 3.2 mM) of manganese chloride (MnCl2). Manufacturer: RESONANCE HEALTH ANALYSIS SERVICES PTY LTD

View Specs →

gudid Cardiovascular magnetic resonance (CMR) T2 mapping is key to quantifying myocardial inflammation. The T2CMR Phantom is made of nine (9) plastic tubes (30mL) containing different concentrations of nickel chloride (NiCl2) in agarose. T2CMR Phantom is provided to MRI Centres for the verification of T2-mapping stability across different 1.5T and 3T scanners (different manufacturers and models) and to understand the feasibility of delivering a T2 standard. Manufacturer: RESONANCE HEALTH ANALYSIS SERVICES PTY LTD

View Specs →

gudid The T1CMR Phantom contains a range of nickel chloride in agarose solutions that mimic cardiac T1 and T2 values. T1 measurement is used to calculate the extravascular volume fraction (ECV) to detect diffuse myocardial fibrosis. It is provided to MRI Centres for the verification of T1-mapping stability across different 3.0T scanners (different manufacturers and models) and to understand the feasibility of delivering a T1 standard. Manufacturer: RESONANCE HEALTH ANALYSIS SERVICES PTY LTD

View Specs →

gudid The T1CMR Phantom contains a range of nickel chloride in agarose solutions that mimic cardiac T1 and T2 values. T1 measurement is used to calculate the extravascular volume fraction (ECV) to detect diffuse myocardial fibrosis. It is provided to MRI Centres for the verification of T1-mapping stability across different 1.5T scanners (different manufacturers and models) and to understand the feasibility of delivering a T1 standard. Manufacturer: RESONANCE HEALTH ANALYSIS SERVICES PTY LTD

View Specs →

gudid Alignment Block Manufacturer: MEDTEC, INC.

View Specs →

gudid Reusable non-sterile (15 x 15 x 2.0cm) bolus with skin Manufacturer: MEDTEC, INC.

View Specs →

gudid 15 x 15 x 1.5cm Manufacturer: MEDTEC, INC.

View Specs →

gudid 15 x 15 x 0.5cm Manufacturer: MEDTEC, INC.

View Specs →

gudid 15 x 15 x 1.0cm Manufacturer: MEDTEC, INC.

View Specs →

gudid 30 x 30 x 3.0cm Manufacturer: MEDTEC, INC.

View Specs →

gudid 30 x 30 x 2.0cm Manufacturer: MEDTEC, INC.

View Specs →

gudid 30 x 30 x 1.5cm Manufacturer: MEDTEC, INC.

View Specs →

gudid 30 x 30 x 1.0cm Manufacturer: MEDTEC, INC.

View Specs →

gudid 30 x 30 x 0.5cm Manufacturer: MEDTEC, INC.

View Specs →

gudid 40 x 40 x 1cm Manufacturer: MEDTEC, INC.

View Specs →

gudid 40 x 40 x 0.5cm Manufacturer: MEDTEC, INC.

View Specs →

gudid 30 x 30 x 0.3cm Manufacturer: MEDTEC, INC.

View Specs →

gudid 30 x 50 x 1.0cm Manufacturer: MEDTEC, INC.

View Specs →

gudid 30 x 50 x 0.5cm Manufacturer: MEDTEC, INC.

View Specs →

gudid Sun Nuclear Sono403 Multi-Purpose Phantom SCG Manufacturer: SUN NUCLEAR CORP.

View Specs →

gudid End-To-End SRS Head Phantom Manufacturer: VARIAN MEDICAL SYSTEMS, INC.

View Specs →

gudid Varian Mobius Verification Phantom Manufacturer: VARIAN MEDICAL SYSTEMS, INC.

View Specs →

gudid MRI PHANTOM Manufacturer: Smith & Nephew, Inc.

View Specs →