Product Classification / EMDN Category
FDA Product Code: IXQ
Directory of devices assigned to product classification code IXQ.
gudid
iBEAM evo Couchtop EH is intended to support the patient during radiation therapy or radiation therapy simulation.iBEAM evo Couchtop EH is compatible to the Elekta Harmony PSS.
Manufacturer: 3C-Medical Intelligence GmbH
View Specs →
gudid
iBEAM evo CT Overlay RT is intended to support the patient during CT and PET CT imaging procedures for radiation therapy applications.
Manufacturer: 3C-Medical Intelligence GmbH
View Specs →
gudid
iBEAM one Couchtop is intended to support the patient during radiation therapy or radiation therapy simulation.
Manufacturer: 3C-Medical Intelligence GmbH
View Specs →
gudid
The HexaPOD evo Extension long is designed to support the patients upper body and extends the end of the iBEAM evo Couchtop integrated in to the HexaPOD evo Couchtop, thus allowing treatment of the abdominal area in very tall patients. This extension is dedicated for use with the HexaPOD evo RT System.
Manufacturer: 3C-Medical Intelligence GmbH
View Specs →
gudid
The removable accessory rails are positioned along the superior lateral area of the iBEAM evo Couchtop EP. They are designed to be simply and easily removed between treatments.
Manufacturer: 3C-Medical Intelligence GmbH
View Specs →
gudid
The iBEAM evo Extension 650 is designed to support the patients upper body and extends off the end of the iBEAM evo Couchtop by 650 mm, thus allowing for treatment of the prostate in very tall patients.
Manufacturer: 3C-Medical Intelligence GmbH
View Specs →
gudid
The iBEAM evo Extension H&N is designed to support the patients head and neck region and extends off the end of the iBEAM evo Couchtop by 400 mm. The small profile (omega shape) optimizes the access to the treatment area, facilitating the use of complex and non coplanar beam angles.
Manufacturer: 3C-Medical Intelligence GmbH
View Specs →
gudid
The iBEAM evo Extension 415 is designed to support the patients head and neck region and extends off the end of the iBEAM evo Couchtop by 415 mm.
Manufacturer: 3C-Medical Intelligence GmbH
View Specs →
gudid
The Solid Inlay is required for the Connexion Central Opening Module. It provides an area with low attenuation properties.
Manufacturer: 3C-Medical Intelligence GmbH
View Specs →
gudid
The Short Indexing bar is required for accurate repositioning of accessories at the middle area of the Connexion Lateral Opening Module.
Manufacturer: 3C-Medical Intelligence GmbH
View Specs →
gudid
The Indexing Bridges are required in order to use the BodyFIX 14 Target Positioner together with the Connexion Lateral Opening Module for SBRT.
Manufacturer: 3C-Medical Intelligence GmbH
View Specs →
gudid
The removable accessory rails are positioned along the superior lateral area of the Connexion Imaging Module and the Connexion Central Opening Module. They are designed to be simply and easily removed between treatments.
Manufacturer: 3C-Medical Intelligence GmbH
View Specs →
gudid
Providing patient-specific immobilization for head and neck treatments often require a variety of immobilization devices. The Connexion Head and Neck Module provides a dedicated solution to support head and neck immobilization, by providing a common interface to not only Elekta immobilization devices, but also other commonly used third party accessories.
Manufacturer: 3C-Medical Intelligence GmbH
View Specs →
gudid
By reducing attenuation and build-up doses to the skin from treatment fields that would normally pass though the couchtop, the Connexion Lateral Opening Module is designed for techniques that use oblique fields, such as SBRT. This module increases clearance around the couchtop, giving you extra flexibility in treatment set-up when you need it.
Manufacturer: 3C-Medical Intelligence GmbH
View Specs →
gudid
Being able to reduce attenuation in this scenario results in lower skin dose to the patient. The Connexion Central Opening Module provides a central opening where attenuation and dose build-up are minimized, allowing you to reduce skin doses.
Manufacturer: 3C-Medical Intelligence GmbH
View Specs →
gudid
Designed to address the needs of IGRT, IMRT and VMAT techniques, the Connexion Imaging Module accomplishes this through its low, homogenous beam attenuation properties, providing a sophisticated solution for modern treatment techniques.
Manufacturer: 3C-Medical Intelligence GmbH
View Specs →
gudid
The Connexion modular couchtop consists of a Base Board that attaches to the Precise Table and several modules which can be attached (and detached) to the Base Board. Each of the different modules is designed to fulfill specific treatment scenarios.
Manufacturer: 3C-Medical Intelligence GmbH
View Specs →
gudid
iBEAMevo CT Overlay Siemens MPT rests above the plane of the original CT Cradle.
Manufacturer: 3C-Medical Intelligence GmbH
View Specs →
gudid
iBEAMevo CT Overlay Siemens PHS-1600 rests above the plane of the original CT Cradle.
Manufacturer: 3C-Medical Intelligence GmbH
View Specs →
gudid
iBEAM evo CT Overlay Toshiba Aquilion LB rests above the plane of the original CT Cradle.
Manufacturer: 3C-Medical Intelligence GmbH
View Specs →
gudid
iBEAM evo CT Overlay GE LS PU rests above the plane of the original CT Cradle.
Manufacturer: 3C-Medical Intelligence GmbH
View Specs →
gudid
iBEAM evo CT Overlay Philips BCT rests above the plane of the original CT Cradle.
Manufacturer: 3C-Medical Intelligence GmbH
View Specs →
gudid
iBEAM evo CT Overlay Siemens P20 rests above the plane of the original CT Cradle.
Manufacturer: 3C-Medical Intelligence GmbH
View Specs →
gudid
iBEAM evo Couchtop CA is compatible to Siemens ZXT, Varian ETR and Nucletron Simulix table pedestals with the configuration of the respective Ibeam Couchbase Adapters.
Manufacturer: 3C-Medical Intelligence GmbH
View Specs →
gudid
iBEAM evo CT Overlay GE LS RT16 rests above the plane of the original CT Cradle.
Manufacturer: 3C-Medical Intelligence GmbH
View Specs →
gudid
iBEAM evo Couch Adapter allows mounting of the BrainLAB Couchmount System for Varian Exact.
Manufacturer: 3C-Medical Intelligence GmbH
View Specs →
gudid
iBEAM evo Couchtop EP is compatible to the Elekta Precise PSS.
Manufacturer: 3C-Medical Intelligence GmbH
View Specs →
gudid
iBEAM evo CT Overlay rests above the plane of the original CT Cradle.
Manufacturer: 3C-Medical Intelligence GmbH
View Specs →
gudid
iBEAM Indexing Bar (Set of 3) is designed for the BodyFIX 14 Indexing System and allows indexing and positioning of compatible surface mounted accessories
Manufacturer: 3C-Medical Intelligence GmbH
View Specs →
gudid
Designed for use only with Oakworks Ultrasound EA tables: intended to be used by healthcare professional
Manufacturer: OAKWORKS, INC.
View Specs →
gudid
intended for use by healthcare professional / designed to prevent patient from falling off of the table
Manufacturer: OAKWORKS, INC.
View Specs →
gudid
Siemens Biograph mCT with Lok-Bar , rectangular extension, and storage rack
Manufacturer: MEDTEC, INC.
View Specs →
gudid
For use with TotalRT All In One Solution and Type-S Overlays and Extensions
Manufacturer: MEDTEC, INC.
View Specs →
gudid
Siemens Vario 2 CT with Lok-Bar , rectangular extension, and storage rack
Manufacturer: MEDTEC, INC.
View Specs →
gudid
Siemens Vario RT CT with Lok-Bar , rectangular extension, and storage rack
Manufacturer: MEDTEC, INC.
View Specs →
gudid
For securing the Varian IsoCal phantom to the CIVCO 53cm UCT Couchtop
Manufacturer: MEDTEC, INC.
View Specs →
gudid
Varian TrueBeam Couchtop with Lok-Bar, rectangular extension and storage rack
Manufacturer: MEDTEC, INC.
View Specs →